The Small Mobile Pelletizing System is our newly designed and manufactured pellet production line for clients who want to make own pellets at home. This small pellet plant includes pulverizer, cyclone separator, silo, feeder, pellet mill, vibrating screen, bag-type dust collector, foundation frame and electric cabinet, which are the main components. It can not only process sawdust, stalks and straw, but also pelletize animals’ forage and fodder. The raw materials cover a range of sawdust, twigs, straw, rice husk and peanut shells, etc.
This is the related video about small mobile pelletizing system.



Main Technical Parameters:

Type: GPM-300R

The range of diameter of pellets: 6-12mm, with pellet density of 1.1-1.3t/m³ and moisture content of ≤8%;

Overall dimension(L*W*H): 3720*2080*2080MM

Brief descripiton of the process:
Pulverizer—cyclone separator—silo—screw conveyor—feeder—pellet mill—vibrating screen —bag-type dust collector

Pellet yield: 250-350kg/h

Key Parts of Small Mobile Pelletizing System:

1. Pulverizer
This small pellet plant adopts hammer mill. Therefore, for its pulverizing section, the hammer mill's output is mainly decided by the size and moisture content of the raw material and mesh size.

Lubrication requirements of pulverizer
The two bearing pedestals of the hammer mill have a lubricating nipple respectively. Grease shall be applied every four hours.

Main technical parameters:

Model: TFS-420
Power(kw): 11  
Yield:  550-700kg/h
Qty of the hammer blades: 16
Weight: 280kg
Packing size(mm) : 1090*820*1100
Other references : Capable of pulverizing lumber with the diameter less than 30mm.

2.Silo/Storage bin
The bin is used for storing raw materials. There are two methods to put the raw material into the bin: thanks to air flow, the pulverized material will fall into the bin via cyclone separator; alternatively, raw material in qualified size can be added in straightforward from the bin inlet.

3. Screw Conveyor
The screw is used to convey materials driven directly by the motor. Some tips in operation and maintenance of the elevator are as following:
¤Beware of foreign matters and impurities mixed into the feedstock.
¤Regular inspection upon the machine should be conducted lest components loose.
¤The feeding speed shall be handled properly for sufficient material supply, in case that feedstock accumulate inside the bin box and result in abnormal running.
¤The tapered roller bearings on each end should be lubricated every four working hours.
¤Keep an eye on the sealing packing. The bolts of which should be tightened efficiently. If it cannot be further adjusted, please change the sealing packing with a whole new one.
¤The oil level of the reduction gearbox should be checked per month to ensure the oil taking up one third of the gearbox. If not, please add it up.


4. Feeder
The feeder, just as shape and structure of the screw conveyer aforementioned, is used for putting feedstock into the pellet mill continuously.

5. ZLSP-300B(R-TYPE) Pellet Mill
The ZLSP-300B (R-TYPE) pellet mills are professionally designed to process biomass raw materials via technological innovation. The sphere of raw materials cover sawdust, straw, rice husks, bamboo shavings, peanut shells, bagasse, alfalfa and so forth.


6. Vibrating Screen
Sifter, just as its name suggests, can also help to cool pellets down at the same time. The pellet crumb and scraps collected under the wire mesh should be cleaned away timely. Meanwhile qualified pellets will be discharged at the rear outlet. During the operation, the sifter works stably. Furthermore, vibrating screen can be converted frequently, while the rotating directions of the two motors should keep opposite.

7. Bag-Type Dust Collector
It is used mainly for collecting powdery material and dust. Due to the collector equipped with an induced fan, on one hand the ash content of exhausted air will remarkably reduced; on the other hand, not only pellets can be cooled in the meantime, but also the working environment can be kept as clean as possible.




Safe Operation Norms
- Before operation, please ensure all connecting parts are tightened well and the ground wire is also in position. Otherwise, do not boot up machines.
- During working, any electric element shall not be touched in case of threatening to personal safety. If the power supply is still on, do not change any circuitry element.
- No touching running components.
- Equipment maintainer should be trained or professional; please stringently stick with principles of electric control; the maintenance should be done under the absolute condition of power off.
- The working atmosphere should remain ventilated with sufficient illumination; no build-up of raw material in the working area; keep the operating place neat and tidy; No fireworks and no smoking lest deadly explosion may occur.
- Please inspect fire protection facilities regularly to realize secure production.
- Lubricate all parts as required.




Over many years of practical experience, GEMCO products have become best sellers worldwide, especially our wood pellet machine. Now the mobile small pellet complete plant is our new advanced technology product. If you are looking for a wood pellet production line with high quality, high efficiency and competitive price, please email us for more information.

If you have large scale wood pellets production, please visit subsidiary company of AGICO GROUP Henan Kingman M&E Complete Plant Co., Ltd, which franchise wood pellet line.